Limited AR about done

Rifles, Machineguns, Mortars, etc...
Post Reply
Dan B 3/75
Ranger
Posts: 470
Joined: February 13th, 2010, 12:33 pm

Re: Limited AR about done

Post by Dan B 3/75 »

What kind of trigger assembly are you running with in that thing?

I've got an AR I want to keep stock, however, I have thought about getting a better / lighter trigger assembly to help tighten it up.
kevino
Ranger
Posts: 14
Joined: April 29th, 2009, 7:11 am

Re: Limited AR about done

Post by kevino »

Nice comp! That is the best comp out there IMO. I agree with you on the PRS weighting the rear out, that stock is becoming more and more popular because it balances the rifle so well.

How do you think those 52g will hold up in the wind at 300 and beyond? I was shooting 55's at the FB3G last year and the wind was kickin on the long range stage and that made me decide to start shooting 69's or 77's.
D Co 124 MI LRSD 24th ID 90-93
A Co 1/5 Inf 2 ID 93-94
2/187 Inf Recon Plt 101st 94-96
2/11 Inf IOBC Cadre 96-99
RS 01-95
BadMuther
BANNED
Posts: 7970
Joined: March 14th, 2003, 2:13 am
Been thanked: 1 time

Re: Limited AR about done

Post by BadMuther »

want2race wrote:.

I rotated the front base 2 RCH's to the right and now it zero'd with the rear centered.

What does RCH stand for?


I have the rear sight set up for 50/200 and 25/300 zeros. It's 8 clicks up for 25/300 setting. It works for 25/50/200 but I haven't shot at 300 yet.
Can you break the above down to me barney style in reference to your rear sight zero's?
BadMuther
BANNED
Posts: 7970
Joined: March 14th, 2003, 2:13 am
Been thanked: 1 time

Re: Limited AR about done

Post by BadMuther »

PS-nice rifle and awesome shooting!
Dan B 3/75
Ranger
Posts: 470
Joined: February 13th, 2010, 12:33 pm

Re: Limited AR about done

Post by Dan B 3/75 »

That's pretty fuckin' sweet!

What are the target sizes and max range you shoot at in 3-gun on average?
BadMuther
BANNED
Posts: 7970
Joined: March 14th, 2003, 2:13 am
Been thanked: 1 time

Re: Limited AR about done

Post by BadMuther »

want2race wrote:Our local matches are close up so we use smaller targets (small as 4inches). We shoot out to 50m. At other larger 3gun matches it's common to see 100, out to 350 and 450 yards.

RCH= Red Cunt Hair. The front sight base is a clamp on. I loosened it, and rotated it to the right about a half degree.

The rear sight set up is as follows:
The 3/6 setting is 8 clicks up from bottomed out. Do do this takes a small allen wrench. There is a set screw that keeps the top part of the elevation wheel together with the bottom portion of the wheel. Back the set screw out a bit and you can twist the numbers on the wheel without clicking elevation into the sight. With the sight clicked up 8 clicks, rotate the numbers until the 3/6 is back to the left side where the indication line is.

WIth this set up, the sight bottomed out will be the 50/200 zero. 8 clicks up will be the 3/6 setting which is the 25/300 setting.

When getting initial zero at 25m, sight is 8 clicks up. Zero at 50, sight is all the way down. Adjust front as needed.
Thanks brother!
Post Reply

Return to “Weapons of War”